Bait Boat Equipment and Baitboat Spareparts

In the beginning it seems quite complicated to build a baitboat by yourself. However, if you have the right baitboat accessories, part and the following tips and instruction DIY manuals, it's actually a piece of cake. Here you find baitboats spareparts and how to build baitboats.

In the beginning it seems quite complicated to build a baitboat by yourself. However, if you have the right baitboat accessories, part and the following tips and instruction DIY manuals, it's... read more »
Close window
Bait Boat Equipment and Baitboat Spareparts

In the beginning it seems quite complicated to build a baitboat by yourself. However, if you have the right baitboat accessories, part and the following tips and instruction DIY manuals, it's actually a piece of cake. Here you find baitboats spareparts and how to build baitboats.

1 From 3
No results were found for the filter!
Komplette Elektronikeinheit unserer XXL 2020 und X-Jet 2020 Futterboote.
CM complete electronic unit for XXL 2020 & XJet...
This original box is part of our boat boat kits , simply plugged in and contains the following outputs: 2 x controller connection 2x battery connection (lead or Lipo or LifePo4) Lighting/LED (the dimming relay is already integrated in the box) Continuous current for e.g. echo sounder, autopilot, etc.
€47.95 *
Progrmmierbare Fernbedienung für Futterboote von Graupner
Graupner remote control MZ-12 HoTT 2,4 Ghz...
Radio control from Graupner for bait boats and model making Graupner remote control with 12 control functions and 250 model memories allows the system to control numerous models, whether baitboat, flight, heli, copter, car or boat. Here, too, we rely on our proven HoTT 2.4GHz transmission technology with ultra-fast response time, which ensures maximum functional reliability...
€199.95 *
Akku Ladegerät
Jamara Lipo charger for rechargeable batteries
We offer you a state-of-the-art charger to charge your batteries gently. The device was specially developed for all our rechargeable bait boat batteries. Technical data: 50W power balancer board ;suitable for the following batteries: Lifon, LiPo, LiFePo, NiCd, NiMH with adapter for 12V 0.1 - 5 A Power
€38.95 *
Bait Boat Bag - Black Line Edition
Bait Boat Bag - Black Line Edition
Carp Madness Bait Boat Bag Black Line Edition The Carp Madness Black Line Edition bait boat bag is exactly cut to the Carp Madness XXL baitboat. The bag is equipped all around with storage compartments and pockets for spare batteries, remote controls, depth sounder or GPS devices. The bait boat bag also has a well-padded carrying strap, so that the bait boat can be...
€44.95 * €49.95 *
Futterboot Bauteile
Inspection cover for CM bait boats
Here you can buy the two revision covers suitable for our Carp Madness XXL bait boats. Colour: black or carbon selectable
€33.95 *
Futterboot Bauteile
Brushed speed regulator - BEC
High-quality regulators for bait boats with BEC function In addition, these have an ABS function, which means that the motors are significantly more protected than with other controllers. These controllers are used in our standard bait boat models with Dirty Devil 655 speed motors. Due to the BEC function, the receiver does not need its own power supply, which is provided by...
€35.95 *

You need these components to build your own bait boat

In this category you will also find high quality spare parts and accessories for all Carp Madness baitboat. The bait boat spare parts fit partially also with bait boats of other Baitboot manufacturers. To build a bait boat for carp fishing yourself, you don't need any special knowledge. All you need are manual skills and the right small parts for the bait boat.

We couldn't find any magnetic release systems that are safer and quieter than servo control. One often hears or reads in forums that food collects on the magnets and the flaps open unintentionally or that the triggering is much too loud and has a scare effect on the carp. We don't want that, so we rely exclusively on the proven technology of the digital servo motor.

The right components for your own bait boat

The bait boat hulls must be particularly strong and connected at both ends so that the feed trough can be attached, or rather inserted, between the hulls in the middle. But first to the hull itself, and how to build the bait hulls.

First of all, when building a bait boat, the question arises what it actually consists of.

A bait boat must have the following components:

  1. a feed shaft
  2. the bait boat hull
  3. small technical parts for radio communication to the bait boat

Of course, the finished bait boat must also be driven somehow. Most of the time the professional hobby craftsmen decide for the jet propulsion. This means that the water enters under the boat hulls and is then ejected as a jet from behind.

High-quality small parts for the construction of bait boats

For this you need the following bait boat accessories: lead batteries, battery cells, motors (Speed 600 are popular) and of course servos with all cable connections. In addition, you need feed flaps, drive shafts and the appropriate lighting as well as a radio remote control).

All small parts for the construction of a Baitboat can be bought cheaply online in our Bait Boat-Shop. The Carp Madness cunstruction manuals make building your own feedboat a lot easier. Have you thought, for example, about herb protection filters that prevent different plants from getting caught under the boat and thus slowing it down?

Very often drive screws and inspection covers are bought together. More information and offers can be found online. However, it is always advisable to compare the different pages, offers and prices with each other, because meanwhile so many products are available that you can always find a good and advantageous offer and value for money.

1 From 3
Viewed